Specification | Description |
---|---|
Angles Leg Out | 4" x 4" x 3/8" |
Angle Leg In | 4" x 4" x 3/8" |
Flats on Edge | 4" x 1" |
Flats on Flats | 7.5" x 1.375" |
Pipe (Additional Tooling Requred) | 4" Sch 40 to 63" dia |
Square (Additional Tooling Requred) | 4" X 3/16" |
Diameter of Roll Shafts | 4" |
Universal Tooling Diameter | 12" |
Roll Speed | 16' / min |
Motor 480/3/60 or 230/3/60 | 15 HP |
Floor Dimensions (WxLxH) | 48" x 57" x 66" |
Weight | 5,850 lbs |
Pacific States Machinery Co
PO Box 3038
Clackamas, OR 97015-97015
503-722-5117
sales@PacificStatesMachinery.com